@honcho-ai/dsh-honcho

dsh-honcho

English | 中文 | Русский

Persistent memory for DeepSeek Harness, powered by
Honcho.

dsh forgets everything when a session ends. This plugin gives it memory that doesn't: what you're building,
how you like to work, what you decided last week and why. It reads the same ~/.honcho/config.json as the
other Honcho integrations, so there is one place to configure all of them — and pointing two of them at the
same workspace gives them one shared memory.

Install

dsh plugin --profile <name> add @honcho-ai/dsh-honcho

Then put your API key and name in ~/.honcho/config.json:

{
  "peerName": "your-name",
  "auth": { "apiKey": "${HONCHO_API_KEY}" },
  "hosts": {
    "dsh": { "workspace": "dsh" }
  }
}

Get a key at app.honcho.dev. HONCHO_API_KEY in the environment also works on its
own — the config file is only needed to change defaults.

What it does

Injects what Honcho knows at the start of a session — your peer card, a summary of this project's session so
far, and the conclusions Honcho has drawn that are relevant to what you just asked. One API call, shaped to a
character budget, refreshed as you work.

Captures every turn. User and assistant messages go to Honcho in the background, debounced, and flushed at
turn boundaries, before compaction, and on shutdown. Secrets are redacted first.

Gives the model three tools:

Tool	For
honcho_search	Looking something up. Searches raw messages and derived conclusions.
honcho_chat	Asking a question of judgment. Reasons over everything Honcho knows. Slow.
honcho_remember	Saving a durable fact, preference, or decision.

/honcho shows status and a link to the session in the Honcho dashboard — see Commands below.

Configuration

Everything behavioral lives in ~/.honcho/config.json under hosts.dsh — the same file claude-honcho,
codex-honcho, and the other integrations read. Root holds identity and connection; the host block holds
behavior.

The file is read as strict JSON: the comments and trailing commas below are annotation only. Leave them in and
the whole file is skipped without a warning, so every setting falls back to its default.

{
  "peerName": "your-name",
  "workspace": "honcho",
  "baseUrl": "https://api.honcho.dev", // bare host or …/v3 both fine
  "timeoutMs": 30000,
  "auth": { "apiKey": "${HONCHO_API_KEY}" },
  "enabled": true, // global kill switch
  // sessions may also sit here as a fallback; the host block wins

  "hosts": {
    "dsh": {
      "workspace": "dsh",
      "aiPeer": "dsh", // defaults to the host name
      "observationMode": "unified", // unified | directional
      "sessionStrategy": "per-directory", // see Sessions below
      "sessionPeerPrefix": true, // session names are <peer>-<dir>
      "sessionPrefix": "", // literal prefix on every generated name, e.g. "vps-"
      "sessions": { "/path/to/repo": "pinned-session-name" }, // pin a session
      "injection": {
        "sessionStart": ["directives", "summary", "peerCard"], // + representation
        "perTurn": ["userContext", "dialectic"], // userContext = representation + card
        "tools": true,
        "searchTopK": 10,
        "searchMaxDistance": 0.6,
        "maxConclusions": 15, // how many conclusions Honcho RETURNS
        "maxRenderedConclusions": 4, // how many survive filtering into the prompt
        "contextTokens": 1500,
        "cadence": { "dialectic": 5, "ttlSeconds": 300 },
        "dialectic": {
          "reasoning": "low", // minimal | low | medium | high | max
          "maxChars": 600,
        },
      },
      "capture": {
        "saveMessages": true,
        "saveToolUse": false, // one-line summaries of tool activity
        "writeFrequency": "async", // async | sync
        "noisePatterns": [], // additive to the built-in secret patterns
      },
      "messageUpload": {
        "maxUserTokens": 6000,
        "maxAssistantTokens": 6000,
      },
    },
  },
}

Injection components

The two menus differ in cadence, not in what they can carry.

injection.sessionStart is injected once when a session opens: directives (guidance on using memory),
summary, peerCard, representation.

injection.perTurn refreshes as you work:

• userContext — a fresh, prompt-scoped peer context blob: representation + peer card, retrieved using
  your current message as the search query so recall is associative rather than merely recent. It is a bundle,
  so it supplies both regardless of what sessionStart names. To get one without the other, name it in
  sessionStart and set perTurn: [] — at the cost of per-turn refresh.
• dialectic — a reasoned answer about you, run every cadence.dialectic turns and shaped by
  injection.dialectic. Nothing waits on it after the first turn, so a late answer reaches the next one.

Components the canonical schema names but this plugin does not implement — briefing, assistantContext,
sessionContext — are reported at startup rather than silently dropped, as are schema keys it does not act on
(showContents, statusline, globalOverride, granular observation, multiUser) and any key renamed since
an earlier version. Nothing here is accepted and quietly ignored.

The plugin's own cordis.yml config carries plumbing only — configPath, apiKeyRef, host, enabled. Set
host to run a credential-isolated profile ("dsh_work") against the same install.

Sharing memory with other integrations

Each integration defaults to its own Honcho workspace — dsh here, claude_code for claude-honcho — and a
workspace is the isolation boundary, so by default they do not see each other's memory. Point them at the
same workspace to merge them:

"hosts": {
  "dsh":         { "workspace": "shared" },
  "claude_code": { "workspace": "shared" }
}

Keep peerName identical across them too, since conclusions are stored per peer. sessionStrategy: "git-remote" and sessionPrefix are proposed for claude-honcho as well, so a repo worked on from both can be
pointed at one session on purpose rather than by accident.

Sessions

Default: one long-lived session per project directory, named <peerName>-<dir>, matching claude-honcho. Pin a
different name for any path with the root sessions map — an override always wins.

sessionStrategy	Session name	Notes
per-directory (default)	<peer>-<dir>	Stable across restarts and branches
per-repo	<peer>-<repo-root>	Same memory from any subdirectory
git-remote	<peer>-<host-owner-repo>	From the origin URL, so the same repo on two machines is one session. Falls back to per-directory outside a repo or without an origin
git-branch	<peer>-<dir>-<branch>	Falls back to per-directory outside a repo or on a detached HEAD
per-session	<peer>-chat-<id>	A clean slate every restart
global	<peer>	One memory for everything

per-directory and per-repo name a session after a folder, so two different projects that both live in a
web directory silently share one memory across machines. git-remote is the fix: it reduces the origin URL
to host/owner/repo, so git@github.com:you/web.git and https://github.com/you/web agree, and you/web and
someone-else/web do not. It compares the URL as configured, so machines that clone through different ssh
Host aliases — github.com-work on one, github.com on the other — still get separate sessions.

sessionPrefix puts a literal string in front of every generated name — "vps-" gives vps-you-web — for
when the machine a session came from should be visible in it. It applies to every strategy. A name pinned in
sessions is used exactly as written and is never prefixed.

Prefer the wider scopes. Honcho's guidance is not to scope sessions too thin: the background Deriver needs
a single session to accumulate enough material before it can reason well. git-branch splits a project's
memory per branch, and per-session discards it on every restart.

Commands

Command	Does
/honcho	Status: peer, workspace, session, strategy, pending uploads, last sync, last fetch
/honcho config	Resolved settings, the file they came from, and any ignored injection components
/honcho flush	Sync now

Requirements

• Node ^22.19.0 || >=24.0.0
• A running dsh, 0.2.0-rc.1 or earlier (typechecked against 0.2.0-rc.1; tested on 0.1.2-rc.1 through 0.2.0-rc.1)
• A Honcho API key, or a self-hosted Honcho at baseUrl

Development

bun install
bun test
bun run typecheck
bun run build

See ARCHITECTURE.md for the design and the reasoning behind each extension point.

Credit

dsh-honcho-sync by
@nanpaidashi (MIT) inspired the initial design of this plugin

The ~/.honcho/config.json contract, the session-naming convention, and src/redact.ts come from the sibling
Honcho integrations — claude-honcho,
codex-honcho, and their relatives.

DeepSeek Harness is MIT-licensed, and its
Cordis plugin model is what made a native integration worth writing
instead of a hook bridge.

License

MIT